Need Help-Where does this plug goto?

[booostN20]

Hi guys just got a glanza found out my passenger wing mirror wouldnt move or retract in or out... I open up the door panel and found this plug loose. Ive searched everywhere but cant find anywhere to plug it in. Am i missing another piece or is there somewhere else i have to plug it into?

http://img219.imageshack.us/img219/2865/1000302kk5.jpg (http://img219.imageshack.us/my.php?image=1000302kk5.jpg)
http://img219.imageshack.us/img219/1000302kk5.jpg/1/w800.png (http://g.imageshack.us/img219/1000302kk5.jpg/1/)

Cheers

[ivan]

Looks like that door has been resprayed.

Is there a rubber boot between the door and the chassis? This rubber insulate the wires. You will have it on the drivers door too.

It could be a door from a different model (i.e. n/a model pov pack with no power options)

[booostN20]

Looks like that door has been resprayed.

Is there a rubber boot between the door and the chassis? This rubber insulate the wires. You will have it on the drivers door too.

It could be a door from a different model (i.e. n/a model pov pack with no power options)

Yep your right has been resprayed and cant find a rubber boot or anything...what do i need to rehooked this up? Would i just need the loom or it cannot be done...

[ivan]

you need to get the old door if you can. The wires were probably cut, and are sitting under the dash. Just reextend the wires, or go to wreckers and get the bits.

To do it properly, you will have to drill into the door and chassis to fit the rubber boot again and run the wires through it

[HardcoreEP]

Actually that doesn't look like power windows. http://hardcore.ep91.com/exterior_smirror.html