Tech questions...

[ivan]

This section is about technical questions about starlets. If you have a question, please ask and we will try and lelp you.

Questions may be about a number of things including:
-Q's about the articles on this site
-Q's about problems you are having with your starlet
-Q's about suggestions we may have for a particular scenario

Either way, please ask away :)

Ivan

[ivan]

And dont be scared to ask :)

[1300cc]

i can easily change my username to 1500cc :), but what do i need for my engine to make it 1.5L or 1.6....is it expensive....doe ecu needs to be changed

[jezza323]

search this forum for threads about a 5e

5e is the 1.5L bottom end compatible with the 4efte head (they actually use the same head on the earlier 5e's)

[Hillclimber]

What are the quoted wet weights for EP71, 82 and 91's?
Also what are the quoted standard 0 to 100km/hr and 1/4mile times for each of the above?
Cheers.
David

[1300cc]

search this forum for threads about a 5e

5e is the 1.5L bottom end compatible with the 4efte head (they actually use the same head on the earlier 5e's) sorry, i didnt mentioned that i have a 4efe na engine.....

[jezza323]

ahh right, well then you will want either an early 5efe, or if you can find one, a 5efhe (higher CR, better cams, higher rev limit, stronger rods). avoid the later 5e's as they not as good (by early i mean pre 94)

check out my thread for my 5efhe build HERE (http://www.austarletclub.com/forums/index.php?showtopic=635) :)

[1300cc]

ahh right, well then you will want either an early 5efe, or if you can find one, a 5efhe (higher CR, better cams, higher rev limit, stronger rods). avoid the later 5e's as they not as good (by early i mean pre 94)

check out my thread for my 5efhe build HERE (http://www.austarletclub.com/forums/index.php?showtopic=635) :)
so i shld b looking 4 a paseo el44 1994, jst the bottom end, right?, i doubt if i can find a 5efhe one....thnx 4 da info......:)

[jezza323]

you dont need just the bottom end, you can use the whole motor :)

[HardcoreEP]

What are the quoted wet weights for EP71, 82 and 91's?
Also what are the quoted standard 0 to 100km/hr and 1/4mile times for each of the above?
Cheers.
David

EP82: 860kgs
EP91: 920kgs

EP82 7sec 0-62mph 15.2 1/4 time
EP91 7.2sec 0-62mph 15sec 1/2 time

[1300cc]

you dont need just the bottom end, you can use the whole motor :)
hang on,,,,ur confusing a nooby here:confused: if i use the whole motor do u mean the whole engine...will it be a direct fit?

[jezza323]

so i shld b looking 4 a paseo el44 1994, jst the bottom end, right?, i doubt if i can find a 5efhe one....thnx 4 da info......:)

i was just replying to this for you

the heads are exactly the same, so you might as well use the whole thing

[Hillclimber]

EP82: 860kgs
EP91: 920kgs

EP82 7sec 0-62mph 15.2 1/4 time
EP91 7.2sec 0-62mph 15sec 1/2 time


Thanks Hardcore:)