Administrator
Tech questions...
This section is about technical questions about starlets. If you have a question, please ask and we will try and lelp you.
Questions may be about a number of things including:
-Q's about the articles on this site
-Q's about problems you are having with your starlet
-Q's about suggestions we may have for a particular scenario
Either way, please ask away
Ivan
Administrator
And dont be scared to ask
Use the Search!
i can easily change my username to 1500cc
Administrator
search this forum for threads about a 5e
5e is the 1.5L bottom end compatible with the 4efte head (they actually use the same head on the earlier 5e's)
Beginners Corner
What are the quoted wet weights for EP71, 82 and 91's?
Also what are the quoted standard 0 to 100km/hr and 1/4mile times for each of the above?
Cheers.
David
Use the Search!
sorry, i didnt mentioned that i have a 4efe na engine.....Originally Posted by jezza323
Administrator
ahh right, well then you will want either an early 5efe, or if you can find one, a 5efhe (higher CR, better cams, higher rev limit, stronger rods). avoid the later 5e's as they not as good (by early i mean pre 94)
check out my thread for my 5efhe build HERE
Use the Search!
so i shld b looking 4 a paseo el44 1994, jst the bottom end, right?, i doubt if i can find a 5efhe one....thnx 4 da info......ahh right, well then you will want either an early 5efe, or if you can find one, a 5efhe (higher CR, better cams, higher rev limit, stronger rods). avoid the later 5e's as they not as good (by early i mean pre 94)
check out my thread for my 5efhe build HERE
Administrator
you dont need just the bottom end, you can use the whole motor
Super Moderator
EP82: 860kgs
EP91: 920kgs
EP82 7sec 0-62mph 15.2 1/4 time
EP91 7.2sec 0-62mph 15sec 1/2 time
Posting Permissions
Reply With Quote