how to install the glanza instrument cluster to a starlet life 97 model

[type5om]

can anyone tell me how to install the glanza cluster to a starlet life 97 model please
because i took mine out and plug it in
but the light and gauge are all over the place
please help with the solution
thank u

[ivan]

Hi there mate,

because im nice :P ill give you all the info i have. Its not formatted and i would appreciate it if you could confirm the wiring. (yes you have to change the wiring).

Let me know how it goes and any changes necessary.

Ivan

p.s. Ill upload the file in an hour or so... cant find it at the moment.

[bncf1]

Hi y'all.

Im a newby at starlets and cant find any manuals etc for ep91s, so need a little help.

I am installing an aftermarket tacho to ep91 and saw on other forums a note about the tacho wiring behind the dash cluster to attach the rpm wire to.

Any ideas as to what this looks like or wiring diagrams? Much appreciated for any help.

ben

[ivan]

bncf1, will answer your question in your other post

type5om, will upload the files in this thread in a couple of mins.
Ivan

[ivan]

attached files REMOVED for the time being...

as i said please update any mistakes i might have made and i will write up a proper docco.

Ivan

[type5om]

your number one
i got it all fix thank you soo much

[ivan]

NO WORRIES.
Just let me know if any wires were different...
ivan

[type5om]

i have two yellow/ green wire
and the temp just rise to the top
and i have a big orange wire as well
dont know what they for??????

[type5om]

and another thing how u work the tacho
and theres is another connector a black one ?????

[ivan]

The big orange wire (thicker than the others because it has an insulation and shielding) is the tacho wire.

I ended up with 2 spare wires where they are most likely extra powers or earths.

Ivan